Patio doors are an easy way to go from inside to outside, whether you're entertaining friends or just enjoying the outdoors. If your patio door isn't sliding smoothly, you might need to adjust it.
Remove the plugs made of plastic and locate the screws that adjust the lower rail to adjust the height or lower of your door. Verify that the door is level and smoothly rolls (Photo 1).
Window Treatments
Consider light control, privacy and aesthetics when selecting window treatments for sliding doors. Do you want to prevent natural light from shining on your furniture or artwork? Or would you prefer that the sunlight is only allowed to enter when the sun is at a low level in the sky.
The kind of window treatment you select can also create an individual appearance. For instance, if the sliding patio door is just one pane of glass, it is possible to add mullions to divide it into smaller panes of glass to create a more decorative appearance. Window treatments are available in soft or hard materials. They be a variety of cellular shades, roller shade, woven wood shades, and drapes, to curtains, drapes and valances. They can be placed on top of other window treatments, like a swag, or used as a stand-alone item.
Vertical blinds are one of the most sought-after window treatments for patio door. They have large panels of fabric, referred to as vanes that can be tilted open and close, letting you control the amount light that enters your home. They can be operated with the use of a wand, or a cord and chain.
A window film can be used to minimize glare and save energy on an outdoor patio. These are a great way to enhance your sliding door or as an alternative window treatment like an cellular shading.
You can select either a swag or valance to cover your sliding doors for a more traditional appearance. They come in a variety of materials and colors, as well as traditional tabs, pinch pleats, and grommet designs. You can also get them with a blackout lining to provide more privacy and light control.
It is important to keep in mind that a patio door must be able to slide between closed and open and closed, so it is recommended to hang your window treatments at a height to support this function. This will make them safe for children and pets.
If your window treatments do not have a rod pocket or are in the shape of a valance, you can use a traverse rod that allows them to move horizontally across your sliding patio door repair service doors. Hang them around an inch above the patio doors so that they don't smudge heads.
Rollers
If your patio door starts to sound squeaky, it's usually due to worn rollers. These rollers, which are located at the bottom of the door to allow it to slide down tracks, may become stuck or rust over time. This can make the doors hard to open and close, and can cause loud noises when in motion. There are few tips to help repair patio door lock your sliding doors so that they will open and close smoothly.
It is recommended to start by oiling the tracks. This will make the door move more smoothly, and must be done at least once a year. A high-quality lubricant is purchased at a local hardware store. Make use of a silicone spray if you have tracks made of vinyl and a wax-based lubricant for wooden tracks. If the lubricant doesn't work, you may need to replace the rollers.
You can also adjust the rollers. This is a task that requires two people because you'll need to lift the doors and locate the screws in plastic on the bottom of the track. They have a small screw which needs to be removed with the help of a screwdriver. These screws can be rotated to raise or lower the rollers and allow the door to contact less of the track.
Another possibility is that the doors are not properly seated in the track. This could result in a gap between the frame and door which could result in cold air entering on a cold day, or hot air escaping out on a hot day. If this is the situation, you will need to remove the door and frame to see what is causing it to open.
If the gap was caused by the track you can fix it by taking off the upper portion of the track. Then screw it back to its original position. Installing new tracks could also repair the gap, and give the door something to rest on while it is in use.
Tracks
If the doors aren't opening or closing easily, it may be time to lubricate the tracks. This is a simple task that will help in improving the ease of operation of your patio door.
Take the door off the frame and set it on a flat, level surface so that it is not in your way while you work. If the door is heavy, it might be necessary to have someone else help you lift and hold it while you work. Using brushes and hot soapy water, thoroughly vacuum the track of your sliding door. Vacuum the blinds that are between the glass of your sliding doors.
Dust and dirt can accumulate close to the tilt and lower/raise operators of Next Dimension vinyl patio door, affecting their operation. If your door is equipped with these, be sure to clean the surfaces regularly with a vinegar-water solution or a window cleaner.
Signature and Pro patio doors feature an anti-lift block that is located in the head pocket, so they require an opening of 3- 6" opening to remove this feature and allow the sill track to drop. Slide the sash or panel into the open position and then lift it up to tilt it inward. This will clear the sill pocket so that the track can lower from the head jamb. Repeat the procedure on both sides of the panel or sash.
Glass
If your glass for the patio door is cracked, it can cause a lot of problems. It may block sunlight from entering your home, and it can make the area unusable until the glass is replaced. Cracked glass can also be hazardous, as it can shatter and cause injuries to someone hit in the head with fragments.
Fortunately, it's quite simple to repair broken doors and frames. The first step is to clean the glass to eliminate dust and dirt that have accumulated over time. After cleaning the glass, you can apply a clear coat to protect it from the elements. You can also add an attractive film to the door to improve the privacy and appearance of the door.
A roller that isn't aligned properly could be the cause of your sliding glass door not operating smoothly. Typically, the adjustment screws are located on the bottom of your door. They may be covered by trim caps. If you can't find the screws, you can try raising or lowering the door until it appears even on the track.
Before you attempt to fix a sliding glass door, ensure you have the tools you need. You'll also need a screwdriver and a wrench and caulk or plastic putty. You'll also need to remove any furniture from the door to ensure you are able to work on it easily. You can also place blankets or foam sheets underneath the door in order to shield it from scratches when you remove and replace it.
The first thing our engineers do when they arrive at a work site to fix the tilt and slide patio door is to identify the manufacturer of the mechanism. This can be done by removing the covers on the rollers (bogies) which are located at the bottom of the door. Alternatively, you can look for a label on the side panel or handle. If you're unable to find the label, your best option is to contact the manufacturer directly.