If you want to enhance the security of your home, without compromising the aesthetics, choose sash lock door handles. They can be used with mortice locks or sash lock, and can also be combined with the nigh latch to offer extra locking for internal door.
These handles consist of a lever/handle mounted on backplates and are typically used with a three or five lever mortice lock. They can also be combined with tubular latches.
Lever Lock Handles
There are many types of lever handles that will fit any decor. The rustic lever locks are very popular in both farmhouse and modern homes. Classic lever handles are either round or spherical and easy to hold. They are affordable and simple and can be incorporated in any style of decor. Select polished or satin nickel chrome handles for a classy appearance. These finishes are sturdy and easy to clean. Other options include antique bronze and polished brass. A lot of handles feature a decorative design, such as small amber worm eyes or long-horned crystals. Some levers feature a star, pin or some other shape that is molded into the bottom.
To change your lever lock door handles first make sure you have the correct screwdriver or other tool to remove them. Depending on the design and model you may need to use an awl or nail to remove the lever handle. Some lever handles have a narrow notch or hole on the opposite side of the base that can be used to pry it open.
Follow the manufacturer's directions for removing your handles once you have the correct tool. Make sure the spindle is in place on the new lever. Doors that are morticed (cut into the door) to accommodate latches from the past or locks, and need to be fitted to a specific spindle size. Most lever handle manufacturers have an established door spindle size for handle.
If you wish to replace a sash lock door handle, take off the handle that was previously used and disconnect the tubular latch bolt from the strike plate on the door frame. The latch bolt needs to be inserted through a hole in the door's frame and then connected to the strike plate.
It is essential to keep in mind that when you install a new lever handle all handles that are compliant with the ADA (Americans with Disabilities Act) are designed to operate with a hand. The user must not be required to grip tightly or twist their wrist. To be in compliance with ADA standards of compliance the lever door handle must be operated using only the thumb and finger or even the entire hand.
Sash Lock Handles
The main function of sash lock door handles is to pull the moving sashes together tightly to create a seal. This prevents drafts from entering the room and also helps maintain indoor temperatures, which can help save energy bills throughout the year. They also work well for doors that don't need the security of the keyed locking system.
Mortice sashlocks can be described as sash locks that combine the latch and deadbolt into one case. They are inserted into the door's materials. They work with a pair of door handles and there are a myriad of different options to choose from to match your home.
The lever lock handle is operated by a lever with an opening in the backplate below. This allows a key inserted into the mortice sash window repairs to turn it. This lock is typically used on doors that are not locked like those found in dining and living rooms. However, it is also possible to use with a tubular lock for the security of the door.
They are designed to hold sash together multiple times, and also have hooks that fit inside the keeper. They come in various designs and styles that work with different window types such as sliding or hinged casement windows. Some are made from cast aluminium while others are brass or wrought iron. They're available in a range of finishes to complement other components of your door furniture for instance, escutcheons that secure the keyhole.
The 3 lever sash locks are only suitable for use on doors with internal doors. They do not provide the security required by insurance companies. They also are less resistant to forced entry than their five lever equivalents, making them more vulnerable.
A door sash lock featuring 5 levers is a much better choice for doors that are outside because it offers higher levels of resistance to forced entry and is harder to pick or bypass. These locks feature an upgraded design that has been tested and certified to meet the strictest fire, disability and building regulations.
The first step to replacing sash cords the handle of a sash windows lock is to remove the old fastener by removing the screws from each end. Make sure you have a screwdriver in your possession and carefully separate the pieces so as not to damage them. Mark the screw holes with a pencil to ensure that you place the new fastener in the correct position when you are ready to install it. Remove any dust or flecks of paint, and then screw the new fastener into place. It is essential to test the handle to ensure it functions properly and forms a a tight seal.
Tubular Latch Handles
The tubular latch is an internal latch that can be operated by turning the handle. It is designed to shut the door however it does not secure the door as mortice locks do. They are typically used on internal doors where no locking is required. They can be fitted with knob or lever handles.
Tubular latches are available in a variety of sizes. The sizes range from the economy to the high-end architectural. The dimensions of the door depend on its purpose and whether it is equipped with a lock. If you require an emergency release mechanism that can be triggered by thumbs an emergency, then you need a lockable latch.
The choice of the best latch depends on the backset dimension of your door. This is the distance between the edge of your door and the middle of the hole for the door handle rose/knob and you should choose a latch with an identical backset measurement. This will ensure that the door handle and knobs can operate the latch with ease.
If you are installing a lever or knob with a spring, or without spring, it is important that you select an extremely robust tubular latch. It should come with a double glazed sash windows-sprung follower. This will ensure a smooth latch action and stop it from becoming sluggish or unresponsive after regular use.
The next step is to mount the latch onto the door. The first step is to ensure that the latch is aligned to the top of the door frame/casing. Then mark the location of the latch and drill holes. Utilizing a countersink drill bit will aid in creating the right recess to rest comfortably in.
After the latch has been installed, you can fix it into the door. Before installing your locks or handles, it is important to make sure that the latch functions correctly. To check this simply open and close the door a few times. If it's not working correctly, try lubricating it with WD40 and re-trying it again. If you continue to encounter issues, it could be necessary to talk to an expert installer or locksmith.
Keyhole Handles
Keyhole handles work with a tubular latch installed in the door. The latch is used to open and close the door. The handle is able to engage the latch when it is pushed down and then releases it when pulled up. These types of handles are typically employed on doors that are internal such as living rooms and doors to dining rooms but can also be fitted to front doors if combined with a nightlatch.
Door knobs are a modern type of handle that incorporates a sprung lever/handle on a round or square fixing rose, with an accompanying thumb turn or an escutcheon. They come in various styles and finishes to match the doors of your home. They can be used in conjunction with Euro cylinder locks or multipoint locking systems that provide additional security to the door. This is accomplished through a variety of points of locking along the door height. It requires door handles that are compatible with the correct lock centre dimension to fit the barrel of the cylinder.
Keyhole escutcheons cover the keyhole on the door to conceal it and give the handle a stylish look. They can be purchased as an open-top or screw-on style and are available in a variety of designs to match the door handle. A recessed escutcheon that is attached to the outside of the door to cover the keyhole further and give it a modern appearance, can also be utilized.
Some of the handles are compatible with Euro-cylinder locks. These locks are installed on upvc sash windows doors and require door handles with a Euro cutout for a cylinder and the appropriate screw holes within the backplate to accommodate the euro cylinder. These handles may also require an escutcheon for Euro-cylinders or a standard escutcheon, depending on the application.
It is important to understand the distinctions between a sash or mortice lock and a tubular latch, as well as the compatibility requirements for each. You'll need to take into account the door's thickness and the door hinges as well as the frame reinforcements. the size of the backplate to the handle, the lock centre dimensions and the screw centres on the cylinder.
